I chose a building from Norman Foster, we are calling it the dragonfly building.
I started by trying to figure out how to make my island. I spent a bunch of time messing with soft select then my teacher finally told me to use FFD (thanks a lot). next I made the openings of the buildings which took a while because I had to raise the points then straiten them out.
Next I made the "wings" I started with a plane and shaped it into an arch shape. After it was the shape I wanted I used bend to form it into a cylinder like shape then filled the top hole so it was solid and made that cap slightly concave. I then duplicated that object and resized them to mach the source.
I added the tunnel that creates the interior of the building and added a bridge to the mainland. I added a concrete ground to provide a surface to prevent the island from sinking into the water. Next water was added using a plane and a daylight render. Then I went to TurboSquid to find trees (unfortunately they are ridiculously high poly). Slap some textures on and then render.
I will pull the render into Photoshop to fix some coloring then turn in.
The finished render:
The finished Photoshopped render:
Friday, April 21, 2017
Tuesday, March 21, 2017
Fundementals of 3ds Max
After 3 days of my computer crashing the program before I can even make my first box, I have finally started working.
I set up my images and began the head.

I added the helm, pelvis and shoulder socket.
I added the shoulder pivot upper arm elbow and forearm
I duplicated my arm and started my first leg
I finished my leg and foot which has a front back and middle then added pivot points to my leg joints. in order to personalize it I made the pivots 12 point stars. I also added the cylinder that will be my jet pack tank
Made the jet pack base and exhaust and hip.
Added the light eyes and hose and smoothed the hull.
I set up my images and began the head.
I added the helm, pelvis and shoulder socket.
I added the shoulder pivot upper arm elbow and forearm
I duplicated my arm and started my first leg
Made the jet pack base and exhaust and hip.
Added the light eyes and hose and smoothed the hull.
Finished smoothing everything.
I textured my model but it didn't work the same as the tutorial and the parts that are purple didn't want to change into the substance map. Also the "helmet" didn't texture the substance because it required "map coordinates", and I couldn't figure out how to fix the stretching that the UV unwrap didn't fix. Also when I put the texture on the model turned grey like above instead of showing the color and/or texture.
I also am posting my original textured colors because I like them more since the substance map wouldn't get the colors right. I don't love these colors but I would have if they had been in the map.
Monday, February 27, 2017
UV Mapping
Took a break from the car to watch the UV mapping videos. got to the point where I start working on the ogre.
Have fixed the UVs for arms, legs, and feet. Started on the hands

Finished the body, head and hands yesterday but forgot to update the blog.
Today I finished the loincloth, nails and teeth and fit all the UV into the grid, thus completing the UV tutorials.
The person on the tutorials says it is like a jigsaw and I agree, it is kind of fun as long as your computer works the way it should.

Have fixed the UVs for arms, legs, and feet. Started on the hands

Finished the body, head and hands yesterday but forgot to update the blog.
Today I finished the loincloth, nails and teeth and fit all the UV into the grid, thus completing the UV tutorials.
The person on the tutorials says it is like a jigsaw and I agree, it is kind of fun as long as your computer works the way it should.

Thursday, February 16, 2017
Car Project Maya
I didn't like the images provided so I found new ones. I started the first side of my GT911 had to redo some of it because I forgot to line it up with the overhead and front view. extruded the over the door frame and roof and started the front and back section of the side.

Spent a lot of time trying to figure out how to do the back portion of the side. Pulled in a new picture for my back view.

I extended the back of the car and am shaping it to appear smoother. Don't like my source images, they don't give enough information and don't quite match up.

Just fixed some edge flow problems on my back end.

I found new scource image that gives better information I am now re adjusting my model to sit the pattern. For some reason many of my vertexes needed to be welded so one of the Sr.s helped by fixing it in like 5 min. I under stood how to do it but let him because he was so fast.

Continuing to modify my topography it is looking much better. Having some major edge flow problems on my back end though.

Finished the back end and have most of the front done as well. Extruded the windows in and extruded to define the door.

Closed the front under the head light, defined the door and windows further and made the indention for the door handle.

I finished the windows, tires, exhaust pipes and fin on the back of the car. then mirrored it.
The car is now done but My UVs are all messed up and the car and fin have non-manifold problem. unfolded UVs for tires headlights, exhaust pipes and door handles.

Entire car is done I have been texturing it. It took some experimentation and Googling but I figured it out. I textured everything but the front and back lights.

I finished texturing the lights. In order to texture the headlights I pulled the front view source image and used photoshop to isolate the lights then plugged them into my texturing. I messed with adding ground as well for my rendering, I ended up adding a cobblestone texture to my ground plain.


Spent a lot of time trying to figure out how to do the back portion of the side. Pulled in a new picture for my back view.

I extended the back of the car and am shaping it to appear smoother. Don't like my source images, they don't give enough information and don't quite match up.

Just fixed some edge flow problems on my back end.

I found new scource image that gives better information I am now re adjusting my model to sit the pattern. For some reason many of my vertexes needed to be welded so one of the Sr.s helped by fixing it in like 5 min. I under stood how to do it but let him because he was so fast.

Continuing to modify my topography it is looking much better. Having some major edge flow problems on my back end though.

Finished the back end and have most of the front done as well. Extruded the windows in and extruded to define the door.

Closed the front under the head light, defined the door and windows further and made the indention for the door handle.

I finished the windows, tires, exhaust pipes and fin on the back of the car. then mirrored it.
The car is now done but My UVs are all messed up and the car and fin have non-manifold problem. unfolded UVs for tires headlights, exhaust pipes and door handles.

Entire car is done I have been texturing it. It took some experimentation and Googling but I figured it out. I textured everything but the front and back lights.

I finished texturing the lights. In order to texture the headlights I pulled the front view source image and used photoshop to isolate the lights then plugged them into my texturing. I messed with adding ground as well for my rendering, I ended up adding a cobblestone texture to my ground plain.

Wednesday, February 1, 2017
Fundamentals of Maya
I started the drone for this tutorial and made the frame and one "arm". I proceeded to duplicate the one into the four sided drone. I merged most of the points that needed it but ended up with some unexplained geometry I will investigate next time I work on it.

I worked on the bottom today building geometry to be the battery pack.

I did the latch for the battery pack and put bands on my fore arms and started the legs.


Worked more on the leg

Both legs are done as are the propellers and I started the camra stand.

Added shock absorbers
and a computer port.

I started the camra

finished the camera started the rendering

Textured the model. Had to load from tutorial when mine didn't let me texture after I did the work. Figured out how to fix.

I finished adding texture to the drone using Ps and applying the jpg in hyershade. I also cusomized the coloring. Here is the view from Arnold RenderView and the normal view.


I worked on the bottom today building geometry to be the battery pack.

I did the latch for the battery pack and put bands on my fore arms and started the legs.


Worked more on the leg

Both legs are done as are the propellers and I started the camra stand.

Added shock absorbers

I started the camra

finished the camera started the rendering

Textured the model. Had to load from tutorial when mine didn't let me texture after I did the work. Figured out how to fix.

I finished adding texture to the drone using Ps and applying the jpg in hyershade. I also cusomized the coloring. Here is the view from Arnold RenderView and the normal view.

Tuesday, January 17, 2017
Intro to Maya
Just finished learning the basic navigation of Maya today and started my first follow along project.
next day just got the basics of my ship done

Added on top pieces and modified the body some more but i think i accidentally added extra vertexes at some point because i had to delete them and lost some lines in the process. I'll fix it next time

Accidentally deleted some important edges so I downloaded the model from the tutorial point I am at. trying to add a grid vent to model but it is giving me trouble

Added back vents and started the top one with blades

Finished the engines (I thought they were vents) and started the smoothing process by adding more lines to add sharpness to the smooth

Added on side arms and started the lower section (legs?).

Leg is mostly finished. I started adding a claw to the upper arm

I'm crunched for time so I decided to watch the videos, do enough to get the feel of the tools but "skip ahead" by uploading a few finished scenes to work on. Unfortunately my student program kept crashing so I am watching the videos then will do as much as I can in the last class tomorrow.
I have finished the Texture section! I did all the videos in the section but did not apply bump maps since it made my model white for some reason. Also I didn't apply the layered texture on my because my Maya didn't have the ramp texture the instructor was using and I didn't know what to replace it with. Also I started to follow the layered texturing and ended up turning my fans red... now I can't figure out how to turn them back.
next day just got the basics of my ship done

Added on top pieces and modified the body some more but i think i accidentally added extra vertexes at some point because i had to delete them and lost some lines in the process. I'll fix it next time

Accidentally deleted some important edges so I downloaded the model from the tutorial point I am at. trying to add a grid vent to model but it is giving me trouble

Added back vents and started the top one with blades

Finished the engines (I thought they were vents) and started the smoothing process by adding more lines to add sharpness to the smooth

Added on side arms and started the lower section (legs?).

Leg is mostly finished. I started adding a claw to the upper arm

I'm crunched for time so I decided to watch the videos, do enough to get the feel of the tools but "skip ahead" by uploading a few finished scenes to work on. Unfortunately my student program kept crashing so I am watching the videos then will do as much as I can in the last class tomorrow.
I have finished the Texture section! I did all the videos in the section but did not apply bump maps since it made my model white for some reason. Also I didn't apply the layered texture on my because my Maya didn't have the ramp texture the instructor was using and I didn't know what to replace it with. Also I started to follow the layered texturing and ended up turning my fans red... now I can't figure out how to turn them back.
Subscribe to:
Posts (Atom)

